-
I’m considering going to my first TNIA at Thunderhill. I have a vintage MGTD with a N/A 1250cc XPAG engine with performance mods. Ie bigger carbs, roller cam, billet rods and crank, +.060 forged Arias pistons. Yada yada. Even with the mods this little engine only is estimated to be about 90-100 hp. This is a roadster.
Will I be required to install a roll bar before I can participate? Will two point three inch lap belts be enough? Obviously if a bar is required I will install 5 point restraints. Will wrist restraints also be needed? I’ll likely be the slowest car on the track. Am I crazy?
Iim hoping this will be the beginning of getting the car prepped for vintage racing
Thanks in advance
Bill Chasser